Build Your Own Patio Bar

Build Your Own Patio Bar – Take outdoor entertaining to new heights by creating a three-sided tiki bar with bamboo accents and a grass roof.

1. Determine the size of your structure. The bottom of the bar should be constructed in three separate sections and assembled in place.

Build Your Own Patio Bar

2. Start with the vertical inner walls of the bar using pressure-treated plywood. Measure and cut three pieces for each of the three sections of the bar (nine total – two outer and one middle support for each). All of our vertical pieces are 38-1/2″ tall.

Diy Bar Plans For Building An Indoor Or Outdoor Bar At Home

3. Measure and cut the inner shelves for the bar. There are two shelves on each side of the middle vertical support piece. On both side sections of the bar, our shelves are approximately 30 inches long – that’s a total length of 62-1/4 on each side of our bar. The front part of the strap is shorter than the two sides; The shelves are approximately 19 inches long and the total length of the front of our bar is 50 inches long. Determine the placement of your shelves according to what you store in the shelves.

4. Measure and cut the bottom and top horizontal pieces on each side of the strap (six pieces total).

5. Begin attaching the first side of the strap. Use glue and framing nails to attach the two exterior walls to the top and bottom pieces (creating a rectangle). Attach the inner vertical strip to the top and bottom strips. Then attach the inner horizontal shelves between the vertical sides and the middle.

7. Dry the three parts together. Measure and cut plywood for the face of each bar section. Miter cuts adjacent sides. Attach the plywood to the bar sections using glue and framing nails. Move the bar to its permanent location and attach the three parts together. (It may be too heavy to move after attaching all three sections together.) Use L brackets to attach the sections together.

Grant’s Furniture, Obscurities, & Gifts (wigan)

8. Mark the top of the bar at each corner where you will place the posts for the ceiling.

9. Measure and cut the plywood for the countertops. Determine how many inches of overhang you want on the front and back of the bar. Before attaching the countertop to the bar sections, measure and cut four holes to allow for 4×4 posts in each corner of the countertop. Dry fit the countertop with the posts, making sure they fit.

11. Spread glue into the post holes in the countertop. Insert posts into the hole and hold it steady while someone else nails it from below. For extra support, nail a piece of plywood to the bottom of the bar through the post.

12. Cover the face of the bar base. We used bamboo panels that were attached to plywood with finish nails.

These Grain Bin Gazebos Are The Perfect Summer Retreat! ⋆ Listotic

13. Cut two sets of 2x4s (eight pieces) to fit around the top perimeter of the four posts. Attach a set of planks to the outside of the posts with lag bolts. A second set of 2x4s will be used to form the frame of the roof structure.

14. Glue the second set of 2x4s together into a square. Cut a 4×4 to run down the middle of the square to act as a horizontal support beam. Fasten all the pieces together with framing nails. This will be the basis of the roof structure.

15. Determine the pitch of the roof from the peak to the corner. (Our roof overhangs about a foot on all sides.) Determine the height from the middle horizontal support beam to the peak of the roof. Cut the 4×4 to this height. At the top end of this post, cut a notch in all four corners. Fasten the post vertically over the horizontal support beam with the flat sides facing the corners of the roof frame.

16. Cut four 4×4 posts the length of the pitch (from the top to the corners or depending on how far past the corners). At the extreme end of the post, cut the posts at an angle so that they meet the notch in the vertical post. Pre-drill the posts and attach them with lag bolts.

Garden Summer House Ideas

17. For additional support, cut a 4×4 to fit each corner of the frame connecting the pitched posts to the 2×4 square frame. The bottom of the small support post should be flush with the bottom of the square frame, and the top should be angled to meet the angle of the post. Lag bolt the pieces together.

18. Measure the plywood to fit together on all four sides of the roof. Start in the center and work down (the plywood pieces will increase in size as you move down from under the roof structure).

Use framing nails to attach the plywood to the posts. Leave about four inches between each piece of plywood.

21. Raise the assembled roof structure to the beam structure and use lag bolts to secure at all contact points.

Burns Backyard Renovation

Want to entertain, but don’t have room for a permanent bar? Create a folding table and cabinet to be ready to party at any time. We built it on the patio, but it can also be hung indoors.

These succulents are not only beautiful, but also very low maintenance. Plant them in bright, hand-painted pots and they’ll instantly become the perfect addition to an apartment or dorm room.

Looking for more outdoor seating or a decorative bench for your porch? Try your hand at this easy woodworking project that can be made in under a day.

In just a few steps, you can turn that dusty, old kettle grill into a stylish way to cool your favorite summer chips.

Patio Cover Ideas: 21 Ways To Shelter A Seating Space

If you’re looking for the perfect barstool, look no further. We’ve narrowed down our search for the best seats on the market.

This weekend, build an indoor sandbox for the kids. The roof on this DIY sandbox keeps the play area well shaded and free of leaves, twigs and rain. Bob Vila’s expert advice is the most trusted name in home improvement, home remodeling, home repair and DIY. Tried, true, and trusted home advice

10 DIY Bar Projects to Build Indoor and Outdoor Home Bars Thinking of building a custom bar for your home, but need some inspiration (and instructions)? No matter your style or budget, one of these DIY bar projects is sure to fit.

Adding a wine or coffee bar to an indoor or outdoor living space is a great way to enhance your entertaining potential. While you can buy a prefab bar or hire someone else to build it, building your own bar is a more affordable and rewarding option.

Ultimate Shed Bar Ideas For 2021

By spending a little money on a good project, you can learn how to build a bar that fits any space. Ahead, discover great DIY home bar ideas for backyards, pools, basement dens, and living rooms.

What better addition to a backyard pool than a bar designed for making margaritas, mojitos and daiquiris? The slot-style construction makes these DIY outdoor bar projects easy to follow, with most cuts requiring only a circular saw or miter saw.

It’s wide enough to support up to four people, and the caster wheels make it easy to roll to poolside parties. While cedarwood adds to its cost, the bar can withstand elements and wet patrons.

This large bar can seat up to seven people and has plenty of storage for liquor and barware. Decorative accents, including molding around the bar top and side paneling combined with dark stain, give this bar its classic pub look. Make sure you have enough space in your man cave or basement since this project takes up a fair amount of real estate, about 8 feet by 5 feet.

Of Perth’s Best Rooftop Bars To Sip At Whenever The Sun Is Shining

The sleek, classy look of this home bar makes it worthy of a place in a formal living room. It has a decorative molding around the bar top and a beautiful panel with a brass foot rail that adds authenticity.

These simple bar plans include a place to mount glasses behind the bar where you can store barware and bottles. A cupboard, shelves and even two drawers provide ample storage space under the bar. At 6 feet long and 24 inches deep, this bar can accommodate four people.

This wine bar marries function with rustic form. Sliding barn-style cabinet doors reveal shelves for glassware on one side and a wine rack on the other, while the central opening is large enough to support a wine fridge.

At 5 feet long and almost 2 feet deep, the bar top offers ample space for preparing drinks. Requiring only basic tools that most DIYers have in their garage, the easy-to-follow instructions make this a doable project even for furniture-building novices.

Covered Outdoor Kitchen Ideas For Cooking And Dining Alfresco

This two-story bar includes a beverage preparation area and a serving area.

Build your own bar stools, build your own covered patio, build your own patio table, build your own patio furniture, build your own patio cover, build your own home bar, build your own patio set, build your own patio, build your own paver patio, build your own patio gazebo, build your own tiki bar, build your own brick patio