How To Build Fabric Headboard

How To Build Fabric Headboard – For the past two weeks, I’ve been working on a DIY upholstered channel headboard for our master bedroom makeover. This was one of those projects that didn’t seem to go right at every step. However, I finally got it all figured out, ready, and ready to share here on the blog. (post contains affiliate links, see publication)

Out of my price range, so I browsed online for an affordable option. However, I have yet to find one that I really like. They weren’t linen, they seemed a little too boxy, and they weren’t the height I wanted. I really like tall headboards because they fill the wall nicely and I don’t have to put artwork or pictures above the bed.

How To Build Fabric Headboard

All supplies and dimensions are standard for my project and a king size headboard. I used fence boards because I could get the height and width I wanted without spending a lot of money. In addition, they are light. You can also use plywood, but the fence boards are already cut and ready to go. I completed this project with curbside pickup or delivery (covid-19), so a lot of items were fixed out of necessity instead of convenience.

Kindle Your Creativity: Master Bedroom Redo

First, I cut off the “dog ears” on two of the fence boards, these will be the final pieces. Next, cut everything else to measure 48 inches and cut the ends of the dog’s ears. There will be (2) boards at 6 feet and (8) boards at 4 feet. To make it easy, I laid out each size chart and cut the fabric around it. No measuring, just cut around.

In these COVID times, it has been difficult to just go to the store for supplies like batting or muslin, so I used what I had around the house. We have lots of sherpa blankets, which are soft and manageable. I also used extra fabric, curtains, I brought down from our master bedroom a few months ago.

Each fence board is wrapped in foam, two layers of the blanket, one of additional fabric, and then finally the linen. I used the electric staple gun to put everything behind the fence boards. This staple gun was the best buy and made the project move along much faster. In the corners, I gift wrapped them and sewed them, being careful not to have any boxy corners.

At first I used scrap wood to attach all the boards together and planned to use the end pieces as the legs. I had also attached two D-rings to hold it up to the wall. Joe helped me turn the headboard upright and as we stood there, it slowly began to lean to the left. All the weight was too much, so I took it apart again.

How To Create Your Own Custom Upholstered Headboard

Then, I attached D rings to each table and hung them on the wall individually. This way, I was able to control it better and it is less stressful. In addition, I can easily remove a table if it is necessary to set a corner, or if it is necessary to clean the fabric.

I still have one more little detail to add to this DIY upholstered channel headboard before the master bedroom makeover is complete and I can’t wait to share it! And if you’re not up for the DIY, I shared a few other headboard options below and in this post.

I ended up buying the matching linen bed skirt. The bed skirt matches the linen duvet cover I used as the headboard. Now it looks like a finished bed and much better than my previous white bed skirt.1 out of 5 Easy The hardest part is aligning and stretch the fabric so that it lies evenly.

One way to increase the coziness factor of your bed and make a visual statement in your room is to add an upholstered headboard. Although it makes a big impact, it’s not as difficult to build as you might expect. All you need is ½-inch plywood cut to size, plus 1-inch foam, batting, fabric, and nailhead trim.

Diy Channel Tufted Headboard

Place the foam on the floor and place the wood over it. Trace the outline of the board onto the ocean, then cut the foam with a utility knife.

Repeat step 2 with the batting, leaving a few inches on each side so you can pull the batting over the edge of the plywood when you secure it.

Center the batting on top of the foam, then remove the headboard so the batting is on the floor. Attach to the back side of the plywood with the staple gun, pulling it tight as you go.

Turn the headboard again so that it is right side up. If your fabric has any wrinkles, iron it, place it over the headboard, using clamps to hold it in place, if necessary. Turn the headboard back so the fabric is on the floor.

Diy (giant) Upholstered Headboard + How To Attach It To The Wall

Starting at the top center and pulling tightly as you go, add the fabric to the wood. When you get to the corners, fold the fabric quickly, like you would fold paper. Once the entire headboard is covered, trim any excess fabric.

Flip the headboard right side up again. Line up the window head trim in a straight line, starting from the bottom of one side and working your way up. Tap the nail heads with the mallet.

Attach your headboard to the wall by screwing two D rings to the back of the plywood and hanging them from screws or hooks in your wall.

Get the latest Old House news, trusted tips, tricks, and DIY Smarts projects from our experts – straight to your inbox. , a high-impact project – meet a DIY headboard!

How To Make A Diy Upholstered Headboard

I had “made a headboard” on the to-do list ever since we moved into our house a year ago, so I finally got my push into action. My two requirements? I wanted this DIY headboard to be covered and cost less than $100.

After laying out the batting on my board, I placed my sheet of plywood on top. The size of your plywood will depend on the size of your bed.

Once the batting was secure, I laid out the fabric with the patterned side down. I gave it a quick ironing to get any wrinkles out before starting.

After placing my plywood on top of the fabric, it was time to start stapling the fabric. I started by doing the two long sides. I made sure to pull it tight as I went so it wasn’t too loose in the front.

How To Upholster A Headboard And Frame

The corners are the part you want to be careful with. My method (and I’m not sure if this is the “correct” method or not, but it worked) is to approach it like I would wrap a present. I get one stapled side, and then fold it into the non-stapled side. Then I take that piece up and pull it really tight and install it along the seam.

It takes some practice, but I would just do it a few times until I got the perfect seam and then staple ‘er down.

We searched around and finally came across the heavy duty French EZ Ancor cleat. It is 18 inches and holds up to 200 pounds. I couldn’t find the same brand on Amazon, but this OOK Hangman French Cleat is the same dimensions and weight as the one we used (just a different brand).

You attach one piece of the cleat to the back of the headboard, and one piece to the wall. Then you slide them in together – they have grooves that fit together and snap in firmly.

Diy Upholstered Headboard With Tufting!

We are very happy with how it turned out. The colors are just right and it’s nice to bring another outfit into the room. Plus, it makes our basic bed look about a million times nicer and more expensive.

Since upholstered headboards usually run a couple of hundred dollars, this DIY version will definitely save you a bundle of moola by coming in at under 100 bucks. You’ll never believe how easy it is to make your own DIY Upholstered Wingback Headboard for just a fraction of that cost!

You might remember this little thing called the One Room Challenge that I can’t stop talking about – you know, when we

We got in over our heads agreeing to transform a plain old fashioned bedroom into a country boy bedroom for our little one.

This Diy Headboard Transformed A Designer’s Main Bedroom

In the end, we somehow managed to pull it all off and I couldn’t be happier with how it came together! We filled the room with a ton of work, love and of course DIY’s and, while this rustic plank wall seems to be the star of the show, that gorgeous headboard standing in front of it comes in a close second very close if you ask me. Of course, I have had more ideas and questions about where we can find

How to build headboard, how to make fabric headboard, how to build pallet headboard, how to build a headboard, how to build wood headboard, fabric to reupholster headboard, how to build bed headboard, how to build a fabric covered headboard, fabric to cover headboard, how to build upholstered headboard, how to fabric headboard, how to clean fabric headboard