Simple Diy Window Planter Box

Simple Diy Window Planter Box – By Rita Wagner | Last Updated: September 21, 2021 | Filed in: DIY and How To

Do you have a creative side? Then this project is for you. Flower boxes are a great way to bring some color into your life and making your own can be super fun. Let’s take a look at how to make a wooden window flower box to hang outside your home.

Simple Diy Window Planter Box

Before you start your project, make sure you have a plan. There are many different flower box designs, some simple and some more challenging.

Window Box Ideas For Your Home

For this project, we will be working with a simple flower box design that beginners should be able to pick up. The end result will be similar to the picture above. Here’s what you need to get started:

Now that you have all the tools and supplies you need to complete this task, let’s see how to put this flower box together.

Most windows are designed for standard widths of 488 mm, 630 mm, 915 mm, 1,200 mm or 1,770 mm. The easiest way to figure out how tall your flower box should be is to measure the width of the window. For an outdoor, wall-hung flower box, you can make the long sides of your flower box slightly longer than the width of the window.

Measure the window by placing one end of your measuring tape at the corner of the window where the walls meet. Extend the measuring tape all the way to the other corner to find the width of your window.

Hanging Diy Window Planter Boxes For Indoors

Add between 10 and 20 cm to the measurements of your flowerbox to ensure that the box covers the window and has a bit more on the sides. To get the measurements for your flowerbox, make sure the edge of the board you’re measuring is square. Use an L-square ruler to check this by placing one edge of the ruler over the length of the plank and line the other with the edge you want to measure. If it lines up perfectly, your plank is cut square, if not, draw a line to correct it later.

Measure from your repaired edge 10 or 20 cm longer than the width of your window. This means that if your window is 630 mm wide, the sides of your flower box need to be 830 mm. Be sure to mark the cut-off and make a straight line with the L-square. This line will serve as a guide when it comes time to cut the sides of your flower box.

See also  Paper Craft Ideas For Decoration

Keep in mind that you will need 3 long boards and two short boards for your flower box. To find the measurement of the short sides, measure the width and depth of the plank. To get your height, subtract the width of the side plank from the depth of this plank. For example, if the width is 15 cm and the depth is 2.5 cm, you will need to measure 12.5 cm for both sides.

This will allow the short sides to sit flush with the long side planks while fitting on top of the bottom planks.

Diy Pallet Flower Boxes

Now that you have all your measurements done, you can begin the cutting process. For this you will need a handsaw or a circular saw.

Find your pencil marks to know where to make your cuts. Hold the planks and start sawing along the line. Once done you should have 3 long planks and two short planks. Don’t forget to correct any edges that aren’t square.

For this step, you will need your wood glue, screws, a drill and drill bits. Start by securing one side to the bottom. Simply lay the chosen bottom plank flat on your workbench or clamp it if you have a vice. Place the second plank at a 90-degree angle to the first. Use a drill to make a hole through both planks. Put some wood glue between the planks, press them together and insert the screw into the hole you just made.

This will secure the first corner of the side and bottom boards. Go to the other side and do the same. You will need one to three more screws to secure the middle of the plank to secure the rest of the plank.

How To Build A Planter Box With Legs

If you used it you can now remove it from the vice. If not, just turn the partial box over so you can see the other long side. Secure this plank in place the same way you did the first. You should now have the bottom attached to the two long sides.

Now you can turn the half-built box so that one of the short sides is facing you. Put some glue and then insert the short side. Secure it in place with two or three screws on each side and bottom. This will ensure that it is secured on both sides and the underside. Do the same on the other side.

See also  Diy Crafts For The Home

For this step, get out your sander and sandpaper. Be sure to sand all sharp edges and round corners. This will create a smoother finish and a more elegant look. Sanding will also remove all splinters and prepare your wood for painting.

Now you will need a wood preservative, stain or sealant. Use a paintbrush and cover your entire flower box in sealant/preservative. This will prevent the wood from rotting once you add soil and water to your box.

Easy $15 Fixer Upper Style Diy Cedar Window Boxes

It is best to let the first coat dry thoroughly before applying the second and third coats. If you haven’t made any drainage holes yet, now is the time. Use a cup drill bit to make large holes for water to flow through. Be sure to sand the edges and then paint the holes with wood sealant.

The last step requires liners, nails, wood glue and a hammer. Liners will prevent soil and water from coming into direct contact with your wooden box. This will help preserve the wood and make it last longer.

Simply put glue on the inside of your box, use a plastic liner and smooth it over the top of the glue to secure it in place. Be sure to make holes that line up with your drainage holes. Use small nails to create neat edges where the liner is folded and hammer into place. Do the same around the top to create a neat finish.

Simply fold the liner and hammer a small nail on it to keep it folded and secure. Now all that’s left is to secure your flower box to the wall.

Make An Easy Indoor Spring Planter Box With Simple Supplies

Now that your box is complete, it’s finally time to secure it to the wall. For this, you will need a drill, drill bits, L-brackets, screws, screw plugs and a spirit level. Here’s what you need to do.

The first thing you’re going to do is mark where the L-brackets need to go. Use a pencil, L-brackets and a spirit level for this. First mark where the brackets need to go with a pencil, drill holes where you made the marks, insert screw plugs into the holes, and then put the L-brackets back over the holes. Once it’s lined up, insert the screw and use the drill to screw it into the wall until your bracket is secure.

See also  Diy Projects For Your Boyfriend

Before securing your second bracket, place your box on the first bracket and hold it in place with the second bracket. Place your spirit level on the edge of the box and lower or lift the bracket you are holding until the small bubble indicates that your box is level. When leveling, hold the bracket firmly against the wall and make marks with a pencil where the screws need to go.

You can now put down the flower box and bracket. Drill the holes for the screws, insert the screw plugs and line up the brackets with the holes. Use a drill with a screw bit to screw in the screws and secure the bracket to the wall.

These Simple Planter Boxes Are Easy To Build

If you have a small flower box, two brackets with one on each end will do the trick. If your flower box is too tall, you’ll need to add one or two more brackets to support it in the middle. Just make sure they line up nicely with your flower box just like you did with the other brackets.

Once you have secured the bracket to the wall, you can fix the bracket to the flower box by drilling screws into the wood from below.

Congratulations! Your flower box is now ready to be filled and planted with the flowers of your choice.

Wood that is naturally rot-resistant such as cedar or redwood is a great choice for window boxes. This wood will be in direct contact with moisture and thus needs to be properly treated to prevent your box from prematurely breaking. Naturally rot-resistant wood can last much longer when properly treated.

Pretty Fall Window Box And Container Ideas

Wood sealants such as varnish are the best choice if you need to seal your wood

Outdoor window planter box, diy simple planter box, diy window planter box plans, diy window planter box, diy indoor window planter box, wooden window planter box, veradek window box planter, diy window sill planter box, diy window planter boxes, window box planter, wood window planter box, simple diy raised planter box

Leave a Comment