Recondition 12v Battery

Recondition 12v Battery – Repairing a car is no joke. Besides cleaning and other aspects, there are technical issues that should never be neglected. One of them deals with issues with your oil filter and hydraulic oil filling at the jack. It’s hard work, but if handled with care, it helps keep your car running smoothly and extends its life. The moment your jack starts having trouble lifting your car’s wheels, it’s time to top up its hydraulic oil. If you feel that your work is not producing the kind of results you expected, it is advisable to seek outside help.

Car batteries are used to provide lighting and to facilitate the starting and ignition of your vehicle. Car batteries are expensive and cost between 100 and 300 US dollars. You need to choose the best car battery according to your vehicle needs with our car battery buying guide. However, you can recondition dead car batteries and extend their life for another 5 years. Therefore, you can save a lot of money on car batteries through reconditioning techniques.

Recondition 12v Battery

If you are an entertainment lover and have a good sound system installed in your car, it should be good to run 6×9 speakers with deep bass from the battery to power it so you can enjoy your favorite soundtracks during your trip. More agreable.

Battery Guyz Platinum Lead Acid Automotive Battery, Group Size 58 (12 Volt / 550 Cca)

It is common to observe that many stores buy dead car batteries from low cost car owners. They are professionals and have significant experience in restoring dead cells from a car battery. They were selling refurbished car batteries at very high prices. So why throw away a dead battery when you can recondition it and reuse it for another 5 years or more? Reconditioning is one of the best ways to extend battery life and save a lot of money on vehicle maintenance.

You can recondition a dead car battery at home using simple tools and the procedure explained in this article.

You must begin the renovation process in a well-ventilated area. It should be free from flames as battery acids can ignite during the reconditioning process.

You need to heat distilled water (half a gallon) to boiling point. Add ½ lb of magnesium sulfate (Epsom salt) to boiled water and mix well until the Epsom salt is completely dissolved.

See also  Clean Energy Stocks With Dividends

Battery Reconditioning; Best Diy Kit!

Clean the exterior of the battery with baking soda and clean water to avoid contamination. Baking soda is useful for neutralizing battery acids and making them harmless. You need to remove the corrosion from the cable connections and the battery terminals. You should perform the upgrade process in a clean place.

Well, you have prepared the solution to recondition your car battery. The next step is to remove the battery cell covers using a screwdriver. Remove the top sealed battery cover with a screwdriver. Now you need to remove the plastic caps and drill holes in the indentations. You can use a damp towel to wipe away debris around the battery holes. Do not use a metal funnel to fill the batteries with the solution because the acids react with the metal. You can use a plastic funnel to fill the piles with the solution prepared above. The lead plates of the battery must be immersed in the solution. Now you can replace the battery covers. In the case of sealed batteries, you will need to replace the plastic caps and cover.

You can connect the battery terminals to a battery charger and let it slowly charge for 24 hours. You can repeat this process two or three times continuously to improve battery life. Now the battery is ready to use in your car.

You saved a lot of money by reconditioning your old car battery. You can use this money for other household chores.

Eastwood Launches Exclusive Battery Sustainer Line At Diy Prices

It is also suggested to discharge the battery at regular intervals by turning on the lights inside the vehicle or turning on the headlights. You can recharge the battery again as mentioned above.

Therefore, the process of reconditioning car batteries is very simple. Many professionals make good money from home by buying old batteries, reconditioning them, and reselling them for a higher price.

Many people are injured when reconditioning dead car batteries. This is mainly due to acid burns on the hands and acid spills on the eyes. You must wear rubber gloves when replacing the battery. You should wear goggles to protect your eyes and protective clothing to avoid acid burns. It is advisable to immediately wash the affected area with clean water.

See also  Cheap Renewable Energy

Do not expose the battery to direct sunlight during reconditioning. You should not store the battery in a hot place or expose it to direct sunlight.

A Intelligent Mains Leisure Battery Charger 240v 12v Dc

You must use a suitable battery charger to charge the regenerated battery. You must choose the correct battery charger that works with 12 V batteries. You must remove jewelry and metal tools from the work area. You should never overcharge your battery. Even a small spark in the workplace can cause an explosion and major damage.

When the vehicle will not be used for weeks or months, it is advisable to store the battery on a trickle charger and recharge it periodically. This process protects your batteries from damage and extends their life.

If the battery voltage is between 10V and 12V, you may consider reconditioning the dead battery. Reconditioning batteries with a nominal voltage lower than 10 V is not recommended. It’s just a waste of time and effort. In such a case, you may reconsider replacing the battery with a new battery of the same voltage, amperage, and size. If you purchased the wrong battery with different dimensions, it cannot be used in your vehicle. A faulty battery can damage your vehicle’s internal circuits.

Many car owners spend a lot of money replacing batteries. However, they can recharge dead batteries at home with simple DIY kits. They are inexpensive and extend the life of your car battery by an additional five to 10 years. You can buy consumables at low prices in online stores.

How To Recondition A Car Battery That Won’t Hold Charge?

Author Bio: Wanda Greaves is the co-founder of – a website that helps people find, use, and do just about anything with their batteries, chargers, or related power equipment. All modern vehicles are equipped with an automotive battery. It doesn’t matter if you drive an electric vehicle, a hybrid or an internal combustion engine, it has a battery. This valuable part is often taken for granted until it malfunctions. That horrible feeling when you go to start the car and you know nothing is happening. To avoid this, we will teach you how to recondition a car battery at home.

If you have a vehicle with an internal combustion engine, there may be a lead acid battery under the hood. By comparison, a hybrid typically contains a nickel-metal hydride (NiMH) or lithium-ion battery, while an electric vehicle will include a larger Li-ion battery for longer range.

See also  Investment In Renewable Energy By Country

In this article, we will focus only on the 12-volt lead-acid battery found in most gasoline and diesel vehicles. When someone dies, a jump may be necessary. However, you can avoid this by reconditioning your car battery. With just a few simple steps, you can save yourself a trip to the auto parts store and an expensive battery replacement.

Make sure your car does not have an AGM or GEL battery before beginning these steps. These batteries contain gel instead of liquid, which means they are maintenance-free.

Kds E Concept] Battery Leoch Lp12 90 (12v 9ah) Used Recondition Sealed Lead Acid

However, if you have recharge caps on top of your battery and are sure you don’t have an AGM or GEL battery, you can follow these steps to recondition your car battery:

You cannot recondition any battery. First, you need to test it to make sure it will respond properly to the reconditioning process.

The battery should read at least 12 volts. If instead your reading shows 10 to 12 volts, you may be able to restore normal operation by reconditioning. However, if you recently recharged it and the battery has dropped below 10 volts, there is no reason to test it. At this point, you better get a replacement.

You will replace the electrolyte solution inside the battery. Before continuing, it is useful to prepare this solution so that it is ready to use.

Inspect & Maintain 12 Volt Battery

Heat half a liter of distilled water. Make sure it reaches 150 degrees Fahrenheit. In this hot water, you want to dissolve seven to eight ounces of Epsom salts. Set aside your solution.

Loosen the battery cell caps for quick battery access. Be sure to wear protective gear like gloves and goggles. You are

Recondition old battery, recondition battery, how to recondition car battery, recondition nimh battery, recondition car battery, everstart maxx battery recondition, recondition battery charger, how to recondition old battery, recondition battery near me, recondition deep cycle battery, how to recondition hybrid battery, how to recondition prius battery