How To Build Your Own Aquarium Stand

How To Build Your Own Aquarium Stand

How To Build Your Own Aquarium Stand – Info: At home, practice violin, guitar or piano with my wife and three sons, carpentry in the garage, ride a bike, learn computers, small electronics, edit videos, surf… Learn more about jhawkins14 »

After 15 years of grateful service supporting 750 pounds of glass, rocks, electrical equipment, water, and a mix of various fish and aquatic plants that gave me peace, it was time to accept the resignation of my old particle board. aquarium stand.

How To Build Your Own Aquarium Stand

And instead of going to the store to hire a new one, I’m going to make mine this time. This Instructable will show you what is unique about it and how I built it I hope you can see. You can use a stand like this for fish, reptiles, hamsters or any other pet you would normally keep in an aquarium. And whether or not you take a stand like this, I hope you can see some useful ideas on what you can incorporate into your cabinets.

New Tank And Diy Stand! Got Big Plans For This One.

I’d rather use it to point out something to fishing owners and DIY stand builders than punch in my old stand that’s seen better days.

The designers of my old aquarium stand knew exactly what they were doing. It’s made from inexpensive 1/2″ MDF coated in high-gloss melamine, but still holds up to over 750 pounds. Contrary to the paranoia inherent in many DIY aquarium designs, there’s no need to build a tank stand out of landscaping lumber, fence posts, or 2x4s. ” and 3/4″ plywood, if you consider the direction of forces applied to the stand when distributing the load and determining how the joints engage.

It’s not their fault. It would be difficult to offer an aquarium stand in a color other than black (or sometimes faux wood) because of the wide variety of tank sizes sold at the typical pet store. Particle board is durable enough and inexpensive, but it doesn’t finish well in corners. There is also the widespread practice of manufacturers not finishing the back of their stands because designers always expect to place them on the wall.

See also  Make Your Own Rain Gauge

By the way, oriental medicine clinics and Chinese restaurants put out their items in the middle of the floor? What if I want to keep the tank away from the wall? Do you need a medical degree or a good recipe for Kung Pao Chicken to have it? As clickbaiter puts it, “the answer may surprise you.”

How To: Building An Aquarium Stand

OK, I’ll just be honest. I am . If you’ve never posted or entered a contest before, you should try. It’s fun to share.

I am entering this Instructable into the “Animal Innovations” contest. Merriam-Websters defines “innovation” as “the act or process of introducing a new idea, device or method”. On the next few pages, I’d like to point out what makes this aquarium cabinet’s design and the method used to create it unique. Then there are step-by-step instructions on how to build it. Outside of this contest, we hope you can take some ideas and apply them to your own designs, whether your tank is large or small.

My teenage son and I made a lot of things together. Before making his stand, we spent some time thinking about the balance between the structural needs of an aquarium stand and its aesthetic look and came up with this solution.

The basic idea is to use two rectangular frames. All of the vertical parts supporting the weight of the stand fit neatly into this channel. If you study all the layers from top to bottom, the weight of the aquarium is actually sitting on a stack of boards. There are no shear forces involved and even catastrophic side-to-side collapse is avoided.

Diy Aquarium Stand For A 100 Gallon Tank

This method takes more time than the typical DIY stand construction method, but it uses wood efficiently, looks more professional, and saves space inside the stand.

I’ve attached an “as designed” Sketchup file that may help you build the stand. These are not “finished” (meaning I haven’t re-edited the plan to match the changes I made when making the stand). I recommend using this to bring concepts to mind with photos.

My wife and I are fed up with the way our home is decorated and love rearranging our furniture on the cheap. But the old stand with the ugly back has to be leaned against the wall.

See also  Diy Pallet Planter Box Plans

So while designing this new stand, I thought of three possible configurations. I’d rather do all three than choose one.

How To Choose The Best Aquarium Stand

1) with your back against the wall (and the cord and tube going through the hole in the back);

2) Attach one of the two shorter sides to the wall so that it sticks out like a rod (cord and tube pass through the hole in the side).

3) It’s completely in the middle of the room (with no cords or tubes in sight and a “punctured” tank and power outlet).

However, there was no plan for this anywhere. So the solution was to come up with a design that uses two “secret” removable panels that fit the aesthetics of the cabinet.

The Project Lady

I took everything I didn’t like about my old store bought stand and tried to do something about it. The first four of these ideas can be used to improve store-bought stands or stands you already own.

1. Lighting: It can be dark inside the aquarium stand. Better lighting is really useful for finding the essentials you’ve been saving for the health of aquatic life. The design features a continuous LED light strip around the top edge. I also chose a light paint color to allow the light to reflect.

2. Automatic light switch: Like a refrigerator, the light automatically turns on when you open the cabinet door.

3. Power Cord Manager. The power strip is located close to the door for easy viewing and access. Also, in case of a leak, none of the outlets can be submerged. There are two handles for removing this assembly from the cabinet. Extra cord length can be hidden behind a power cord manager.

It’s Not Amazing, But I Just Build This 55 Gallon Aquarium Stand Out Of A Couple Pallets I Scored From Home Depot.

5. Flat sill: This ultra-delicate stand design is a huge improvement over the pesky lips fishermen keep when trying to get heavy, wet and spillable items in and out of cabinets.

I scoured the web for inspiration and found ideas in kitchen islands in particular. However, my infatuation with beautiful artisanal quality cabinetry ended with me getting an idea of ​​the “look” rather than the architecture. The required strength of a cabinet should always be considered before a manufacturer builds a cabinet the same way they build kitchen cabinets.

See also  Project Home Diy Subscription Box

Inspired by the stain/paint combination, I took the first picture of the table. You can see the similarities with the stand in the second photo.

I made a stand for a rectangular 75 gallon aquarium. You can make one smaller or larger than that, and it can be rectangular, square, or full-faced. So you can keep this list very general and calculate what you need.

My Diy Stand Design. Is This Safe?

*. Planer and digital caliper (pictured). This was my first project using a used planer I bought from a retired colleague. I give the planer the MVP of this project.

Start by cutting the material for both frames from the 3/4″ pine then wire one edge as shown. Then join the two pieces together with a biscuit and glue them together leaving a 3/4″ slot 3/4″ deep .at the lowest point.

I used a circular cutting jig to make a large arc on the outer layer of the bottom frame before gluing. Using Excel and a faint memory of high school geometry (“Yes, there is a purpose,” I remind the kids), I created an arc calculator that tells you the diameter of a circle needed to create the desired arc. The height and width of the arc.

Cut 3/4″ from the inside edge only on the bottom frame to create a flat sill. This allows the 3/4″ plywood base to sit flush with the outside edge, which is essential for a flat sill.

Make A Better Than New Aquarium Stand

The plywood bottom needs to be cut to match the inside perimeter of the 3/4″ slot. My bottom was cut too small, so I covered the gap with glue and trim afterwards.

Fit the 3/4-inch-thick corner pieces first and combine them into biscuits. At this point you can glue the corner piece to the base only. Place the top to secure everything while the glue on the bottom dries. Don’t glue the top on yet.

You can use

How To Build Your Own Aquarium Stand | | 4.5